DECORATIVE PRODUCTS

CARE/INSTALLATION AND MAINTENANCE PROCEDURES

INSTALLATION INSTRUCTIONS

- Inspect your product before installation, complete dry layout.

- Install using a Polymer based adhesive (ANSI A 118.6 Liquid latex/polymer reinforced high quality Portland cement) for grout, ANSI 118.3 water cleanable epoxy grout etc.).

- Follow adhesive manufacturer's instructions for preparation, application and clean up.

- It is recommended to cover the tiles upper surface with painters tape prior to grouting for easier clean up.

- Residue should be removed immediately after grouting.

- If tile requires cutting, apply protective varnish to the cut side. Wait 24 hours to allow curing prior to installing and grouting the application.

- The best way to cut tiles is with a diamond abrasive wet-saw.

- A high-speed drill or a hole saw can be used to drill the tiles.

- Please do not use tile cutters made for marking and breaking tiles.

- Please pay attention that there is minimum 5" inches distance between tiled surfaces and heat if there is no Back-Guard/Back-mount panel behind your cook-tops.

- Please pay attention that there is minimum 6" inches distance between tiled surfaces and the fireplace opening. Please keep a minimum 12" distance above the fireplace opening, if used above and projecting more than 1 ½" from a fireplace face. Please take your state advice on clearance if your area needs more.

- Elegant premium metal resin tile trims and inserts bring a timeless natural beauty to your place. Handmade tile trims and decorative inserts of nature contain variations in metal color, texture, shading and veining. Every piece of handmade decorative product is created to be unique and all pieces look different. A certain amount of variation in shade of metal and dimensions is to be expected.

APPLICATIONS

- Liners and chair rail are recommended for use in residential/light commercial, interior wall applications.

- Products are not recommended for use on countertops.

- Products can be installed and used in wet areas such as backsplashes, bathroom walls and shower.

- Products are not recommended in areas where temperatures rise above 212 °F.

- Products should be installed a minimum of 12" from direct flames.

CARE AND MAINTENANCE

- Clean regularly with clear water and/or neutral (soapless) cleaner, soft soap wipe dry with soft cloth (do not use non-abrasive cleaner).

- Do not use sandpaper, steel wool, scouring pads or any other abrasive materials.